螺桿鼓風機漏油故障是由哪些原因造成的呢？

螺桿鼓風機漏油故障原因及解決措施羅茨風機因為質量不合格或者檢測存有較大誤差，就會(huì )引起鼓風機的一些故障問題，螺桿鼓風機漏油故障是由哪些原因造成的呢？

Screw blower oil leakage fault causes and solutions roots blower because the quality is not up to standard or there is a large error detection, it will cause some problems of the blower, screw blower oil leakage fault is caused by what reasons?

1、鼓風機存有污物

1. There is dirt in the blower

   
   

葉輪上如果存有較多雜質，形成風機間隙太小，就會(huì )影響風機的正常運轉，風機的排氣不暢、螺桿鼓風機振動過度都會(huì )影響到風機整體結構的緊湊度，長期下去就會(huì )有可能造成漏油的情況。

If there are many impurities on the impeller, the fan clearance will be too small, which will affect the normal operation of the fan. The poor exhaust of the fan and excessive vibration of the screw blower will affect the compactness of the overall structure of the fan, which may cause oil leakage in the long run.

2、人為注入太多潤滑油

2. Too much lubricating oil is artificially injected

我們在注入潤滑油時，一定要按照標準進行注入，避免注入過多的潤滑油。

When we inject lubricating oil, we must inject it according to the standard to avoid injecting too much lubricating oil.

3、油箱端蓋加工不合格

3. The end cover of oil tank is not qualified

油箱質量問題導致油箱出現裂縫，或者一些外力的原因導致有限的破損，亦會(huì )導致羅茨風機漏油情況的發生。

Oil tank quality problems lead to cracks in the oil tank, or limited damage caused by some external forces, which will also lead to oil leakage of Roots blower.

4、軸承磨損過度

4. Excessive bearing wear

軸承磨損過度，導致游隙增大，產生漏油的情況發生。

The excessive wear of the bearing results in the increase of the clearance and oil leakage.

螺桿鼓風機漏油情況還有一些其他原因，主要原因大多為：螺桿鼓風機產品質量問題及不科學操作導致的。如果需要了解更多的精彩內容可以點擊：http://www.matsteinwede.com

There are some other reasons for the oil leakage of screw blower, most of which are caused by product quality problems and unscientific operation of screw blower. If you need to know more about the wonderful content, you can click: http://www.matsteinwede.com