空壓機維修中縮短檢修時間的技術方法

在空壓機的使用中，隨著時間的推移，空壓機都會(huì )出現一些故障，那么在空壓機維修中有沒有快讀檢修的方法呢？今天就給您介紹幾個：

Enterprises in the use of air compressor, with the passage of time, the air compressor will appear some failures, so in the air compressor maintenance there is no quick read maintenance method? Today, I'd like to introduce some of them to you

一、應用網絡(luò )技術安排修理計劃，找出關鍵路線，并加以調整優化

1、 Apply network technology to arrange the repair plan, find out the key route, and adjust and optimize it

網絡(luò )技術又稱關鍵線路法，是一種計劃管理方法。它是通過分析項目過程中哪個活動序列進度安排的總時差少來預測項目工期。它用網絡(luò )圖表示各項工作之間的相互關系，找出控制工期的關鍵路線，以達到縮短工期、提供工效、降低成本的目的。

Network technology, also known as critical path method, is a planning management method. It predicts the project duration by analyzing which activity sequence has the least total time difference in the project process. It uses the network diagram to show the relationship between the various work, and finds out the key route to control the construction period, so as to shorten the construction period, provide the work efficiency and reduce the cost.

二、采用同步修理法

2、 Adopt synchronous repair method

將設備中易損件的使用壽命設備成按近，做到同次修理、同次更換。將生產過程中工藝上相互聯系的若干臺設備，安排在統一時間修理。

The service life of the vulnerable parts in the equipment shall be closed to achieve the same repair and replacement at the same time. Arrange the repair of several equipments which are interrelated with each other in the production process at the same time.

三、采用分步修理法

3、 Step by step repair method is adopted

有計劃地分幾次修理設備各相對獨立部分，每次只修一部分、可利用節假日進行修理。

Repair the equipment in several times in a planned way. Each part of the equipment is repaired only one part at a time, which can be repaired on holidays.

四、采用冗余技術，包括采用備機、備用部件替換修理法

4、 Redundancy technology is adopted, including the replacement and repair method of standby machine and spare parts

這種方法又稱儲備技術，有時也稱容災備份技術，它是利用系統的并聯模型來提高系統可靠性的一種手段。

This method is also called reserve technology, sometimes called disaster recovery backup technology. It is a means to improve the system reliability by using the parallel model of the system.

五、采用無維修設計或易維修設計

5、 Adopt no maintenance design or easy maintenance design

無維修設計是一種理想設計，即考慮維修達到“無停機時間”、“無維修費用”的可能性，以設計出不需要維修的設備。它要求從設計開始就要造成設備維修的原因，對于維修費用很高的設備尤為適用。

Maintenance free design is an ideal design, that is to consider the possibility of maintenance reaching "no downtime" and "no maintenance cost", so as to design the equipment without maintenance. It requires that the causes of equipment maintenance should be eliminated from the beginning of design, especially for equipment with high maintenance cost.

本期的精彩內容由山東空壓機的小編整理所得，感謝大家的閱讀，如果有什么不對的地方，歡迎到我們的官網：http://www.jfkyj.cn，給我們留言評論，我們將會(huì )給您一個滿意的答復。

The highlights of this issue are compiled by the editor of Shandong air compressor. Thank you for your reading. If there is anything wrong, please visit our website: http://www.jfkyj.cn Leave us a comment and we will give you a satisfactory reply.